SEPS LED retrofit tube lights are used for office lighting, room lighting, purposes; SEPS LED tube Lights are more energy-efficient, more environment-friendly and more illuminating as compared to regular lights. Their optic lenses give a wider dispersion of light, covering maximum areas and increasing the pole spacing.
| Details | SEPS-TL-RT-18/20 |
| Input Power | 18-20Watt |
| Input Voltage | 90-300V AC - 50 HZ,above 300 V,output voltage cut off protection. Driver Safety test method as per IS 16104 standard |
| Power Factor | More than 0.95 Test method as per IS 16104 standard |
| Colour Temperature | 4000K to 6500K |
| CRI | More than 70 |
| THD | Below 10% |
| Beam Angle | Beam 150 - 180 |
| Led Luminous Output | 90 - 120LM/W |
| LED Make | Osram |
| LED | High bright white power LED shall be use in the luminaries and wattage of LED above 0.2w |
| LED Life | More than 50000hrs |
| LED junction temperature | As per LM 80 Test Re |
| LED Life | More than 50000hrs |
| Luminaries Efficiency | Above 85% |
| Luminaries Lumens O/P | Upto 2200lm |
| Housing | Aluminium anodized rofile with heatsink white mil cover. |
| Finish (Reflector) | Anodized |
| Ingress Protection | IP 22 |
| Operating Temperature | (-30 deg to 60 deg centigrade) |
| LED Driver | Constant Voltage and Current LED Driver current above 150mA to below 1000mA Test Method as per IS 16104 standard |
| Power Factor | Constant Voltage and Current |
| Driver Protection | Short Circuit. Over Load Over Voltage and Over Heat Protection |
| Safety Standard | As per IS Standard, LM 80 |
| Surge protect | up to 4kva |