SEPS LED SOLAR STREET Lights are used for street lighting, campus lighting and garden lighting purposes; SEPS LED SOLAR STREET Lights are more energy-efficient, more environment-friendly and more illuminating as compared to regular lights. Their optic lenses give a wider dispersion of light, covering maximum areas and increasing the pole spacing.
Detail Specification of SEPS SOLAR LED Street Light 20watt
| Details | SEPS-SSL-020 |
| Make | SEPS LED (Shriyash Electricals & Power Solutions) |
| Input Power | 20W |
| Input Voltage | 12V DC Nominal system voltage |
| Luminary IP protection | IP65 |
| LED Colour Temperature | 5500K to 6500K |
| CRI | More than 70 |
| THD | Below 10% |
| Beam Angle | 120 deg. |
| Led Luminous Output | 100lm – 120lm/w |
| LED Make | Osram/Seoul/Edison |
| LED | High bright white power LED shall be use in the luminaries and wattage of in multi LED above 0.5W and below 3W |
| LED Life | More than 50000hrs |
| LED junction temperature | As per LM 80 Test Report |
| LED Life | More than 50000hrs |
| Luminaries Efficiency | Above 85% |
| Luminaries Lumens O/P | Upto 2880lm |
| Housing | IP 65 High pressure aluminium die casting powder coated body, silicon gaskets, toughened glass cover, aluminium heat sink |
| Solar charge controller | Automatic ON-OFF, Dusk to Dawn |
| Protection | Battery discharge and battery over charge protection |
| Indicators | Battery charging and battery low indication |
| Low voltage disconnect | 10.7v |
| High voltage disconnect | 14.4v |
| Low voltage reconnect | 12.7v |
| High voltage reconnect | 14.3v |
| Safety Standard | As per IS Standard, LM 80, LM79 |